What is the Ω-range of a multimeter used to measure?
El Ω fitxer del multímetre és el fitxer de resistència, que s'utilitza per mesurar la resistència valor de la resistència.
When measuring, for the multimeter with automatic range change, there is no need to consider the size of the resistance value, the multimeter can automatically switch to the appropriate range. For a multimeter with manual range change, it is necessary to adjust the range switch to the appropriate position according to the size of the resistance value before measurement. In addition, many manual range multimeter, the minimum resistance file can not return to zero, for example, the general 3 / ½ digital multimeter, its 200 Ω file in the red and black pens shorted, the general display of the reading in the zero point a few to one point a few Ω (the smaller the better this readings), so in the measurement of 10 Ω or less of the small resistance resistance, should be displayed in the readings subtracted from the readings of the red and black pens shorted, so that the result is the true resistance value of a small The result is the true resistance value of the small resistor.
Multimeter measurement of the control line and the switchboard connected does not affect the control loop indicator light slightly bright how to deal with the situation
D'acord amb que tu has dit, hi ha un dispositiu escurçat a terra, perquè el equip estan protecció, tu mesura, la línia zero i la línia de terra deu tenir tensió, en cas contrari el indicador no serà feble il·luminat. Per què és és brillant? Perquè el indicador està connectat a la línia de fase, un pol connectat a la línia zero . Després la línia de fase a terra, perquè la línia zero i la línia de terra té una tensió, així que és, la línia de fase i la línia zero té un voltatge (quan la alimentació font és desconnectada), així la llum indicador és lleugerament brillant. Per què hi ha tensió a les línies zero i terra? Perquè el armari de distribució és una distància de el transformador, allà podria haver tensió entre el pol de terra sota el transformador i el pol de terra de el armari de distribució. Jo aconsegueixo això tot el temps i allà's res a fer però comprovar un dispositiu a un temps.
